T14 Gen 2 (Type 20XK, 20XL) Laptop (ThinkPad) - Type 20XLNM-D451 BIOS,SCHEMATIC,BOARDVIEW

ThinkPad T14 Gen 2 NM-D451
BIOS Schematics
Lenovo Thinkpad T14s Gen 2 AMD
NM-D451.pdf
NM-D451 BoardView.pdf
ITE 1MB.
NM-D451 KB_pins=40 FLASH=1004 LEFT DOWN 05MM PD0=7 PD1=13 PD2=11 PD3=14 PD4=10 PD5=17 PD6=15 PD7=16 BUSY=20 STB=9 AFD=6 INIT=8 SLIN=1 KSI4=5 KSI5=12 IT5679VG-1M

 

[azanwaqas]

hi sir can i read with SVOD

 

[Imranromi]

hi sir can i read with SVOD

Wait until you get successor will read svod can but hard to read.

 

[beyes]

Hi!
I have SVOD4, RT809H, Vertyanov Jig. I can read the first 256K of IT5679 with SVOD4. There is the option to set 1024K, I set it but it reads only 256K. Any idea how to read the full 1024K content?

 

[admin7]

Hi!
I have SVOD4, RT809H, Vertyanov Jig. I can read the first 256K of IT5679 with SVOD4. There is the option to set 1024K, I set it but it reads only 256K. Any idea how to read the full 1024K content?

Use vertynov programmer will read 100%

 

[beyes]

Hi!
I have SVOD4, RT809H, Vertyanov Jig. I can read the first 256K of IT5679 with SVOD4. There is the option to set 1024K, I set it but it reads only 256K. Any idea how to read the full 1024K content?

Use vertynov programmer will read 100%

 

[admin7]

Hi!
I have SVOD4, RT809H, Vertyanov Jig. I can read the first 256K of IT5679 with SVOD4. There is the option to set 1024K, I set it but it reads only 256K. Any idea how to read the full 1024K content?

Use vertynov programmer will read 100%

Do you have original vertyanov successor?
if you dont have contact PM will guide you.

 

[salim1gr]

hi i have read 1mb file nm-d451 need to unoclk

 

[admin]

hi i have read 1mb file nm-d451 need to unoclk

https://pkbiosfix.com/conversations/unlocking.1928/

 

[vanced36]

It appears that SVOD4 reads only 256K by default of the IT5679, even if it is configured to 1024K. Attempt to verify software limits, other read modes, or employing RT809H/Vertyanov Jig for full dump extraction.

 

[Imranromi]

It appears that SVOD4 reads only 256K by default of the IT5679, even if it is configured to 1024K. Attempt to verify software limits, other read modes, or employing RT809H/Vertyanov Jig for full dump extraction.

Yes vertyanov or Successor both support or read 1024kb