Could you help me fix the original BIOS? I’ve already tried other files, but it won’t turn on; with your file, it turns on, but there’s no video output.
dell latitude 7410
st: 52vy253
motherboard fdx40 la-j261p
intel srgkv
dell latitude 7410
st: 52vy253
motherboard fdx40 la-j261p
intel srgkv
About this board
This thread is for the latitude 7410.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
backup.BIN
32 MB · Views: 4
32 MB · Views: 4
