slaam bro.
laptop shutsdown in 3 seconds and no display. i write a bin saved in my pc already. then status is changed that now it remains power on but no display. so please send a good bios
laptop shutsdown in 3 seconds and no display. i write a bin saved in my pc already. then status is changed that now it remains power on but no display. so please send a good bios
About this board
Files for the HP Elitebook 820 G3 motherboard, board number 6050A2892301-MB-A01.
The board was manufactured by Inventec for HP. Inventec board numbers start with 6050A, so you can confirm it on the PCB silkscreen.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Common cases: dead board after an interrupted BIOS update, ME region errors, missing serial number or UUID after a board swap, or a password lock.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for 6050A2892301-MB-A01? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
820 g3 shutdown.BIN
16 MB · Views: 28
16 MB · Views: 28
