Dell Precision 3551 FDV50 LA-J282P BIOS, Scheamatic and Boardview

BIOS, Scheamatic and Boardview Dell Precision 3551 FDV50 LA-J282P
BIOS, Schematic and Boardview

 

[Imranromi]

Dell Precision 3551 FDV50 LA-J282P​

CLEAN ME BIOS
SRJ8F (Intel Core i7-10875H)
FIXED BUILD+CLEAN ME

 

[imssuet]

Dell Precision 3551 FDV50 LA-J282P​

CLEAN ME BIOS
SRJ8F (Intel Core i7-10875H)
FIXED BUILD+CLEAN ME

3 orange 6 white fan full speed no display

 

[admin]

3 orange 6 white fan full speed no display

Try this

 

[farzad.zarivand]

Dell Precision 3551 FDV50 LA-J282P​

CLEAN ME BIOS
SRJ8F (Intel Core i7-10875H)
FIXED BUILD+CLEAN ME

i need same model with graphic

N17s-g1-b-kb-a1
2 gb ram .

 

[admin]

i need same model with graphic

N17s-g1-b-kb-a1
2 gb ram .

Upload old bios and write complete information
Board code
Processor code
Service tag

 

[farzad.zarivand]

Try this

CPu :SRH8P

 

[admin]

CPu :SRH8P

 

[wasim]

card not detect in your bios old bios
power on of

 

[wasim]

sir i need graphic bios prossisor number SRH8Q

 

[admin]

sir i need graphic bios prossisor number SRH8Q

Use this bios your old bios is currupted and not possible to build

 

[rasheed]

Please clean the ME Region of this file. The laptop powers on but stays stuck at the DELL logo. This is the only file that works on my device, so I need it to be fully cleaned and cleared. Thank you.

 

[Imranromi]

Please clean the ME Region of this file. The laptop powers on but stays stuck at the DELL logo. This is the only file that works on my device, so I need it to be fully cleaned and cleared. Thank you.

This file already clean me

 

[rasheed]

هذا الملف قد ينظفني بالفعل

"Hello! Thank you so much for your help and guidance. Could you please help me a bit further with this issue?
"I understand that the ME region is already clean. However, since this is a donor dump from another board, the laptop still freezes right at the Dell logo with the 3 orange / 6 white error.

Could the issue be related to corrupted NVRAM data, a DMI/Service Tag mismatch, or does it require a complete rebuild using FIT for this specific PCH configuration? Since this is the only file that makes the laptop power on, is there a way to clear or fix this freeze? Thank you for your support."

Thank you again for your time and expertise."