The device powers on without any issues, but the fans sometimes shut off and fail to restart. After doing some research online, I found reports of similar problems—such as erratic behavior with the keyboard backlighting, fan circuitry, and touchpad—which were resolved by replacing the EC BIOS with a "service BIOS." Could you please fix this file for me?
CASPER EXCALIBUR G900
DANLCMB1CA0 REV : A
CPU SRKT9
BRIDGE SRKMA
CASPER EXCALIBUR G900
DANLCMB1CA0 REV : A
CPU SRKT9
BRIDGE SRKMA
About this board
This thread is for the CASPER EXCALIBUR G900.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Common cases: dead board after an interrupted BIOS update, ME region errors, missing serial number or UUID after a board swap, or a password lock.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
g900 fan error.BIN
16 MB · Views: 0
16 MB · Views: 0