This thread is for the Casper Excalibur G770 with main board DANLAJMBAE0.
The board was manufactured by Quanta for Casper. Quanta board numbers start with DA and include MB, so you can confirm it on the PCB silkscreen.
Files wanted for this board
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
If you have a working file for this board, please share it below. More files: search DANLAJMBAE0 in File Finder.
The board was manufactured by Quanta for Casper. Quanta board numbers start with DA and include MB, so you can confirm it on the PCB silkscreen.
Files wanted for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
If you have a working file for this board, please share it below. More files: search DANLAJMBAE0 in File Finder.
