Z40A ABELARD SB IID MV MB V1 REV:3.0
biosbin.zip
biosbin.zip
About this board
This thread is for the Z40A ABELARD SB IID MV V1.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash. Board revision: 3.0. Match the revision as well as the board number.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Back up the original dump first — it contains machine-specific data (serial, UUID, MAC, ME), and you will want it if anything goes wrong.
If you have a working file for this board, please share it below. More files: search Z40A ABELARD SB IID MV V1 in File Finder.
Attachments
Z40A ABELARD_SB_IID MV_MB_V1_BIOS.BIN.zip
2.9 MB · Views: 2
2.9 MB · Views: 2
Z40A ABELARD_SB_IID MV_MB_V1 EC_BIOS.BIN.zip
36.4 KB · Views: 2
36.4 KB · Views: 2
