TP LINK TD W8961N UN 4PORT Ver2.0
bios bin.zip
bios bin.zip
About this board
This thread is for the TP LINK TD W8961N UN 4PORT.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Back up the original dump first — it contains machine-specific data (serial, UUID, MAC, ME), and you will want it if anything goes wrong.
If you have a working file for this board, please share it below. More files: search TP LINK TD W8961N UN 4PORT in File Finder.
Attachments
TP-LINK TD-W8961N(UN) 4PORT Ver2.0 TESTED OK.rar
1.5 MB · Views: 6
1.5 MB · Views: 6
