TOP V1.04 5000-0003-9704 Rev;1.5
biosbin.zip
biosbin.zip
About this board
This thread is for the TOP V1.04 5000-0003-9704.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash. Board revision: 1.5. Match the revision as well as the board number.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
u2.BIN.zip
3.2 MB · Views: 0
3.2 MB · Views: 0
u29.BIN.zip
26.6 KB · Views: 0
26.6 KB · Views: 0
