Could you help me fix the file? The computer turns on but doesn't output video.
Thunderobot Zero 16
s/n JT009900G00J0Q3T100C
i9 14900
motherboard: DANLZMB4C10 REV A
Thunderobot Zero 16
s/n JT009900G00J0Q3T100C
i9 14900
motherboard: DANLZMB4C10 REV A
About this board
This thread is for the Thunderobot Zero 16.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
backup .bin
16 MB · Views: 20
16 MB · Views: 20
backup ec .bin
2 MB · Views: 26
2 MB · Views: 26
