Dell
Studio 1735 GM3-MB-E
bios + schematic + boardview
Studio 1735 GM3-MB-E
bios + schematic + boardview
About this board
This thread is for the Studio 1735 GM3- -E.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Usually needed when the laptop powers on with a black screen after a BIOS update, is stuck in a boot loop, or is locked with a BIOS password.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
GM3-MB-E.rar
116.8 KB · Views: 6
116.8 KB · Views: 6
Studio 1735 GM3-MB-E.BIN.zip
1.1 MB · Views: 4
1.1 MB · Views: 4
Studio 1735 GM3-MB-E.zip
131.2 KB · Views: 6
131.2 KB · Views: 6
GM3-DC.ZIP
2.2 KB · Views: 4
2.2 KB · Views: 4
GM3-1226 R2A.PDF
2 MB · Views: 4
2 MB · Views: 4
Quanta GM3 REV 3A.pdf
2 MB · Views: 4
2 MB · Views: 4
Studio 1735 GM3-MB-E GM3 Audio conn.pdf
31.8 KB · Views: 4
31.8 KB · Views: 4
GM3 DC Batt Conector.pdf
42.2 KB · Views: 4
42.2 KB · Views: 4
