Acer Spin SP111-32N N8101 PCB MB V5
Spin 1 SP111-32 Rev:1.2
bios bin
Alien N8101_MB_PCBSILK_bv
Schematic
Spin 1 SP111-32 Rev:1.2
bios bin
Alien N8101_MB_PCBSILK_bv
Schematic
About this board
This thread is for the Spin 1 SP111-32.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash. Board revision: 1.2. Match the revision as well as the board number.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
ec.rar
27.6 KB · Views: 4
27.6 KB · Views: 4
8MB.rar
3.2 MB · Views: 4
3.2 MB · Views: 4
Alien N8101_MB_PCBSILK_bv.pdf
3 MB · Views: 14
3 MB · Views: 14
Alien N8101_MB_SCH.pdf
1.5 MB · Views: 14
1.5 MB · Views: 14
Last edited by a moderator:
