This thread is for the Acer Spin SP513-41N with main board 203120-1.
The board was manufactured by Wistron for Acer. Wistron board numbers are 5–6 digits plus a revision, so you can confirm it on the PCB silkscreen.
Files wanted for this board
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Back up the original dump first — it contains machine-specific data (serial, UUID, MAC, ME), and you will want it if anything goes wrong. Revision matters: use a file made for 203120-1 specifically.
Have a tested dump for 203120-1? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
The board was manufactured by Wistron for Acer. Wistron board numbers are 5–6 digits plus a revision, so you can confirm it on the PCB silkscreen.
Files wanted for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Back up the original dump first — it contains machine-specific data (serial, UUID, MAC, ME), and you will want it if anything goes wrong. Revision matters: use a file made for 203120-1 specifically.
Have a tested dump for 203120-1? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
