This thread is for the Packard Bell Argo C with main board DA0PL1MB6D2.
Packard Bell had this board built by Quanta; Quanta board numbers start with DA and include MB. Check the number printed on the PCB before you download.
Files wanted for this board
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Back up the original dump first — it contains machine-specific data (serial, UUID, MAC, ME), and you will want it if anything goes wrong.
Have a tested dump for DA0PL1MB6D2? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Packard Bell had this board built by Quanta; Quanta board numbers start with DA and include MB. Check the number printed on the PCB before you download.
Files wanted for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Back up the original dump first — it contains machine-specific data (serial, UUID, MAC, ME), and you will want it if anything goes wrong.
Have a tested dump for DA0PL1MB6D2? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
