P330 Workstation 2nd Gen Think Station Type 30D0 I3X0RMS Rev:1.6
biosbin.zip
biosbin.zip
About this board
This thread is for the P330 Workstation 2nd Gen Think Station Type 30D0 I3X0RMS.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash. Board revision: 1.6. Match the revision as well as the board number.
From the title: Intel 2th gen platform.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
8MB U66.bin.zip
3.3 MB · Views: 10
3.3 MB · Views: 10
16MB U67.bin.zip
7.3 MB · Views: 10
7.3 MB · Views: 10
