MS-7A38 1.0 B450M BAZOOKA
B450M PRO-VDH
MSI MS-7A38 1.0 B350M BAZOOKA THIS BIOS WORKS OK
MS-7A38 REV1.0 pdf
MS-7A38 REV2.0 pdf
MS-7A38 REV3.0 pdf
MS-7A38 REV4.0 pdf
MS-7A38 REV5.0 pdf
MS-7A38 REV6.0 pdf
MS-7A38 REV8.0 pdf
MS-7A38 REV8.1 pdf
Schematics
MS-7A38 r5.0 cad Boardview
B450M PRO-VDH MAX MS-7A38 BK0
B450M PRO-VDH MS-7A38.MI1 16MB
B450M PRO-VDH
MSI MS-7A38 1.0 B350M BAZOOKA THIS BIOS WORKS OK
MS-7A38 REV1.0 pdf
MS-7A38 REV2.0 pdf
MS-7A38 REV3.0 pdf
MS-7A38 REV4.0 pdf
MS-7A38 REV5.0 pdf
MS-7A38 REV6.0 pdf
MS-7A38 REV8.0 pdf
MS-7A38 REV8.1 pdf
Schematics
MS-7A38 r5.0 cad Boardview
B450M PRO-VDH MAX MS-7A38 BK0
B450M PRO-VDH MS-7A38.MI1 16MB
About this board
This thread is for the MS-7A38 1.0 B450M BAZOOKA B450M PRO-VDH.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Back up the original dump first — it contains machine-specific data (serial, UUID, MAC, ME), and you will want it if anything goes wrong.
If you have a working file for this board, please share it below. More files: search MS-7A38 1.0 B450M BAZOOKA B450M PRO-VDH in File Finder.
