MPG Z490M GAMING EDGE WIFI MS-7C76 Rev;1.2
biosibn.zip
schematics
biosibn.zip
schematics
About this board
This thread is for the MPG Z490M GAMING EDGE WIFI MS-7C76.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash. Board revision: 1.2. Match the revision as well as the board number.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
MS-7C76 REV13.pdf
4.4 MB · Views: 6
4.4 MB · Views: 6
MS-7C76 REV11.pdf
4.5 MB · Views: 6
4.5 MB · Views: 6
MS-7C76.290.rar
10 MB · Views: 6
10 MB · Views: 6
