Scanned LA-A913P Rev 1.0 motherboard
HDD Sata Connector for Dell Latitude E5450 and E5550.
Fits Sata Connector from old HP CQ42 CQ56 CQ62 G42 G62 G72.
There are only three wires to solder (shift), which was not difficult at all.
The connector that plugs into the motherboard must be opened.
To solder wires from 11,12,13 to 15,16,17.
It is +5V voltage for HDD and nothing more.
Wires from GND, sending and receiving data match.
I personally hacked and tested.
Other links for bios, BRD, PDF schematic and CD3301 Bypass
https://pkbiosfix.com/threads/zam80-zam81-la-a913p-ls-a911p-ls-a912p-ls-a913p.3204/
https://pkbiosfix.com/threads/dell-...e5550-la-a911p-bios-schematic-boardview.1354/
https://pkbiosfix.com/threads/dell-latitude-e5550-la-a911p-cd3301-bypass.297/
HDD Sata Connector for Dell Latitude E5450 and E5550.
Fits Sata Connector from old HP CQ42 CQ56 CQ62 G42 G62 G72.
There are only three wires to solder (shift), which was not difficult at all.
The connector that plugs into the motherboard must be opened.
To solder wires from 11,12,13 to 15,16,17.
It is +5V voltage for HDD and nothing more.
Wires from GND, sending and receiving data match.
I personally hacked and tested.
Other links for bios, BRD, PDF schematic and CD3301 Bypass
https://pkbiosfix.com/threads/zam80-zam81-la-a913p-ls-a911p-ls-a912p-ls-a913p.3204/
https://pkbiosfix.com/threads/dell-...e5550-la-a911p-bios-schematic-boardview.1354/
https://pkbiosfix.com/threads/dell-latitude-e5550-la-a911p-cd3301-bypass.297/
About this board
High-resolution board photos of the Dell Latitude E5550) Sata cable tweak (LA-A913P). They are handy for locating missing components, reading part markings and checking the revision on the silkscreen.
Dell had this board built by Compal; Compal board numbers start with LA- and end in P. Check the number printed on the PCB before you download. Board revision: 1.0. Match the revision as well as the board number.
Also useful for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Useful when a component is burned, missing or unreadable and you need a reference from a good board.
If you have a working file for this board, please share it below. More files: search LA-A913P in File Finder.
Attachments
LA-A913P Rev 1.0 (HD Photos).rar
66.6 MB · Views: 27
66.6 MB · Views: 27
Last edited: