Elite x360 1040 14 inch G9 2-in-1
PCB Ver
---------------------------------------------------
POWDERKE-PV-G3M
6050A3316601-MB-AX4
2021-11-17
-----------------------------------------------------
SPEC
1. CPU: 12TH Gen I7-1265U
2. RAM 16 GB
3. SSD: 256GB (M.2 NVME )
=--------------------------------------------------
NOTICE.
1. Windows 10 update -> HP Firmware update -> reboot -> power lamp yellow blinking -> no power
The MAIN BIOS backed up, but the EC BIOS failed to back up.
Please help me
PCB Ver
---------------------------------------------------
POWDERKE-PV-G3M
6050A3316601-MB-AX4
2021-11-17
-----------------------------------------------------
SPEC
1. CPU: 12TH Gen I7-1265U
2. RAM 16 GB
3. SSD: 256GB (M.2 NVME )
=--------------------------------------------------
NOTICE.
1. Windows 10 update -> HP Firmware update -> reboot -> power lamp yellow blinking -> no power
The MAIN BIOS backed up, but the EC BIOS failed to back up.
Please help me
About this board
Files for the I'm asking HP Elite x360 1040 14 inch G92 in-1 . (MAIN EC) motherboard.
Compare the board number printed on the PCB (between the PCIe slots or near the CPU socket) with the files before you flash.
From the title: convertible (2-in-1) design.
Files listed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
Usually needed when the PC turns on but never reaches POST, loops on start-up, or lost its BIOS during an update.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
W25Q256FV@WSON8.zip
14 MB · Views: 14
14 MB · Views: 14
