I9 APL MB LP3B253 R HT V1.0 CWL529 Rev;1.2
biosbin.zip
biosbin.zip
About this board
This thread is for the I9 APL LP3B253 R HT V1.0 CWL529.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash. Board revision: 1.2. Match the revision as well as the board number.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Usually needed when the laptop powers on with a black screen after a BIOS update, is stuck in a boot loop, or is locked with a BIOS password.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
APL_LP3B253_R_HT_V1.0.BIN.zip
3.9 MB · Views: 2
3.9 MB · Views: 2
