The device powers on with this BIOS file, but there is no display; can you fix this?
HP OMEN 16-AM0047NT
PROID CD8M5EA # AB8
SN 5CD5422HYT
MOTHERBOARD CODE : DAG3TBMBAF0 REV : F
CPU : SRQAN
GPU NVIDIA : GN22-X6-A1
HP OMEN 16-AM0047NT
PROID CD8M5EA # AB8
SN 5CD5422HYT
MOTHERBOARD CODE : DAG3TBMBAF0 REV : F
CPU : SRQAN
GPU NVIDIA : GN22-X6-A1
About this board
This thread is for the HP Omen 16-am0047nt.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash.
Files wanted for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Common cases: dead board after an interrupted BIOS update, ME region errors, missing serial number or UUID after a board swap, or a password lock.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.