HP LAPTOP 16-D0112TX DAG3MMB3AA0 REV:A - G3M
BIOS
DAG3MMB3AA0 Rev A BOARDVIEW(BDV)(.CAD)
BIOS
DAG3MMB3AA0 Rev A BOARDVIEW(BDV)(.CAD)
About this board
Files for the HP LAPTOP 16-D0112TX DAG3MMB3AA0 G3M motherboard.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
DAG3MMB3AA0.rar
5.8 MB · Views: 11
5.8 MB · Views: 11
DAG3MMB3AA0 Rev A BOARDVIEW(BDV)(.CAD).cad
1 MB · Views: 8
1 MB · Views: 8
Last edited by a moderator:
