HP EliteBook x360 1030 G4 DAY0PAMBAF0 BIOS & Board Photos

File inventory

• Model: HP EliteBook x360 1030 G4
• Board/platform: DAY0PAMBAF0 Rev F, Y0PA
• Files included: Tested BIOS images and high-resolution board photo in the first post
• Firmware details: Factory 16MB image and W25Q256 32MB image
• Verification: Confirm the Rev F board marking and installed flash-chip size before use

Always back up the original chip and verify the exact board code and flash size before programming.

HP EliteBook x360 1030 G4 DAY0PAMBAF0 REV F
BIOS Y0PA
Bios tested.
HP ELITEBOOK X360 1030 G4 QUANTA Y0PA HD Photo

 

[majee12]

HP EliteBook x360 1030 G4 DAY0PAMBAF0 REV F
BIOS Y0PA
Bios tested.
HP ELITEBOOK X360 1030 G4 QUANTA Y0PA HD Photo

BOARD ID : DAY0PAMBAF0 REV F
TOUCHPAD NOT WORKING ON WINDOWS BUT WORKS ON BIOS

 

[admin]

BOARD ID : DAY0PAMBAF0 REV F
TOUCHPAD NOT WORKING ON WINDOWS BUT WORKS ON BIOS

Write both on same time

 

[majee12]

Write both on same time

IT works but am face with "hp endpoint security controller on the unit"
SN: CD9137NY8
BORAD: DAY0PAMBAF0 REV F.
The attached is own ec bios . is it possible to reconfig it so that i dont get that error above or what should i do to get rid of it ?

 

[admin]

IT works but am face with "hp endpoint security controller on the unit"
SN: CD9137NY8
BORAD: DAY0PAMBAF0 REV F.
The attached is own ec bios . is it possible to reconfig it so that i dont get that error above or what should i do to get rid of it ?

Read main 32mb bios and upload I'll clear this error

 

[majee12]

Read main 32mb bios and upload I'll clear this error

 

[admin]

Here

 

[majee12]

Here

It doenst turn on . dc led turns white and flashing cap lock

 

[majee12]

It doenst turn on . dc led turns white and flashing cap lock

Can you check because the laptop dosnt turn on at all after the flashing the patch file

 

[majee12]

Can you check because the laptop dosnt turn on at all after the flashing the patch file

Now it turns on after flashing it old ec bios then flashing the ec file you edited to fix the touchpad . can i get it mpm infor for reconfiguration ?
SN: CD9137NY8

 

[admin]

Now it turns on after flashing it old ec bios then flashing the ec file you edited to fix the touchpad . can i get it mpm infor for reconfiguration ?
SN: CD9137NY8

Write these both bios and update

 

[majee12]

Write these both bios and update

SN: 5CD9137NY8 I NEED THE MPM INFOR

 

[admin]

SN: 5CD9137NY8 I NEED THE MPM INFOR

 

[majee12]

Write these both bios and update

This works right away

 

[majee12]

SN: CD9137NY8
BORAD: DAY0PAMBAF0 REV F.
Track-pad not working .
Can you fix it ?

 

[admin]

SN: CD9137NY8
BORAD: DAY0PAMBAF0 REV F.
Track-pad not working .
Can you fix it ?

Write both an try

 

[majee12]

Write both an try

Am face with end point security controller error

 

[majee12]

Write both an try

Model : HP ElyteBook x360 1030 G4

• Serial Number : 5CD032HF6C
• HP SKU : 8WC28UC#ABA
• SYSTEM BOARD CT : PJLRE018JE203T

is the information for the board

 

[admin]

Model : HP ElyteBook x360 1030 G4

• Serial Number : 5CD032HF6C
• HP SKU : 8WC28UC#ABA
• SYSTEM BOARD CT : PJLRE018JE203T

is the information for the board

Write this bios put this information and save settings