HP Elitebook x2 DA0D99RBAG0 rev :G
Bios
Bios
About this board
Files for the HP Elitebook X2 DA0D99RBAG0 motherboard.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash. This listing is for revision G; another revision of the same board can need a different file.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
MX25L25673G 32MB.rar
8.9 MB · Views: 8
8.9 MB · Views: 8
W25Q128JV 16MB.rar
5 MB · Views: 6
5 MB · Views: 6
