HP EliteBook 1040 G3 DAY0FAMBAC1 REV C Bios
About this board
This thread is for the HP EliteBook 1040 G3 with main board DAY0FAMBAC1.
The board was manufactured by Quanta for HP. Quanta board numbers start with DA and include MB, so you can confirm it on the PCB silkscreen. This listing is for revision C; another revision of the same board can need a different file.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for DAY0FAMBAC1? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
DAY0FAMBAC1 REV C TESTED OK.rar
7.6 MB · Views: 9
7.6 MB · Views: 9
