Could you help me repair the original BIOS? It powers on and displays video, but then it shows a BIOS error alert and restarts—that’s all it does.
motherboard: DA0PDMB18F0 REV:F
S/N: 1H85136K3D
amd ryzen
motherboard: DA0PDMB18F0 REV:F
S/N: 1H85136K3D
amd ryzen
About this board
This thread is for the HP 255 g10.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash.
Files wanted for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Usually needed when the laptop powers on with a black screen after a BIOS update, is stuck in a boot loop, or is locked with a BIOS password.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
