ECS B350AM4-M2A Rev:1.3
biosbin.zip
biosbin.zip
About this board
This thread is for the ECS B350AM4-M2A.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash. Board revision: 1.3. Match the revision as well as the board number.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
ECS B350AM4-M2A MM.bin.zip
7.6 MB · Views: 0
7.6 MB · Views: 0
ECS B350AM4-M2A RR.bin.zip
6.2 MB · Views: 0
6.2 MB · Views: 0
