Could you help me fix one of the BIOS files? BIOS 1 is the original, but the system won't turn on with it. With BIOS 2, the system turns on and displays video, but it doesn't save the Service Tag, and the fans run at high speed.
DELL G16 7630
motherboard la-m536p rev 1.0
intel i9-13900hx
st: 2b4j1z3
DELL G16 7630
motherboard la-m536p rev 1.0
intel i9-13900hx
st: 2b4j1z3
About this board
This thread is for the Dell G16 7630.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Common cases: dead board after an interrupted BIOS update, ME region errors, missing serial number or UUID after a board swap, or a password lock.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
1.bin
32 MB · Views: 0
32 MB · Views: 0
2.bin
32 MB · Views: 0
32 MB · Views: 0