Hi Sir,
Seeking your kind advice and suggestion regarding the hp 2000 caps lock blinking twice i already replace the ram and clear cmos
battery when i turn it on without ram it has 3 long beeps and 2 short beeps. can i also request for a good bios bin file for this device. thanks!
Seeking your kind advice and suggestion regarding the hp 2000 caps lock blinking twice i already replace the ram and clear cmos
battery when i turn it on without ram it has 3 long beeps and 2 short beeps. can i also request for a good bios bin file for this device. thanks!
About this board
This thread is for the HP 2000-bf69WM.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash.
Files wanted for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Back up the original dump first — it contains machine-specific data (serial, UUID, MAC, ME), and you will want it if anything goes wrong.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
