ASUS ZenBook Flip S UX370UA Rev;1.2
biosbin.zip
biosbin.zip
About this board
This thread is for the Asus ZenBook Flip S UX370UA.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash. Board revision: 1.2. Match the revision as well as the board number.
From the title: convertible (2-in-1) design.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Usually needed when the laptop powers on with a black screen after a BIOS update, is stuck in a boot loop, or is locked with a BIOS password.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
ASUS ZenBook Flip S UX370UA UX370UAF 310.bin.zip
5.8 MB · Views: 6
5.8 MB · Views: 6
EC.zip
42.1 KB · Views: 6
42.1 KB · Views: 6
