ASK 820-01987-A SoC Rom Dump

Hello, I have a 820-01987 that I need a SoC Rom image for. Whoever programmed it when I bought the board it was banned from activation and I just want to clear whatever junk was programmed in it with a fresh image. Just hoping someone out here may have access to it.

 

[Imranromi]

Hello, I have a 820-01987 that I need a SoC Rom image for. Whoever programmed it when I bought the board it was banned from activation and I just want to clear whatever junk was programmed in it with a fresh image. Just hoping someone out here may have access to it.

Please sent back cover photo Emc model need

 

[felixthecat0795]

I don't have the EMC number as the board was bought without any information
It was bought to replace a burnt out board

 

[Imranromi]

I don't have the EMC number as the board was bought without any information
It was bought to replace a burnt out board

Then read eeprom and send me

 

[felixthecat0795]

give me a bit, I need to take all the electronic components off the blown T201 and install pins to go into my programmer so I can use the socket

 

[felixthecat0795]

Built the socket yay! Here's the very corrupted dump and the serial in it is garbage

 

[Ahsan Tariq]

Built the socket yay! Here's the very corrupted dump and the serial in it is garbage

try this

 

[Imranromi]

try this

Try this file after do dfu mode and restore

 

[felixthecat0795]

There's no data in the image it's all FF

 

[Imranromi]

There's no data in the image it's all FF

Yes ,lets follow
Do dfu and restore

 

[felixthecat0795]

Got it, doing it now

 

[felixthecat0795]

AMrestore error Generic Error guess I'll just throw it in the parts bin

 

[Imranromi]

AMrestore error Generic Error guess I'll just throw it in the parts bin

What was error old bin.
I think your board problem

 

[felixthecat0795]

The old bin showed the error I do believe 4010. I would have to force it into DFU mode as it was stuck in recovery. The bin you all made worked perfectly as soon as I connected to the other mac it went directly into DFU mode without forcing it and it looked like it was going to work this time but then threw the error and when closed the error it went right into recovery. I'll check the board one last time maybe something fell off when it was stored with three other boards. But i may think after the very first time it booted and threw a fit about being a banned serial number when it was online, it may have corrupted the T2 to beyond repair.