Hello, I have a 820-01987 that I need a SoC Rom image for. Whoever programmed it when I bought the board it was banned from activation and I just want to clear whatever junk was programmed in it with a fresh image. Just hoping someone out here may have access to it.
ASK 820-01987-A SoC Rom Dump
- Thread starter felixthecat0795
- Start date
Laptops and Desktop Bios, Schematic and Boardview Files And Repairing Discussion
- Joined
- Oct 17, 2022
- Messages
- 1,211
Please sent back cover photo Emc model need
- Joined
- Feb 27, 2025
- Messages
- 50
I don't have the EMC number as the board was bought without any information 
It was bought to replace a burnt out board
It was bought to replace a burnt out board
- Joined
- Oct 17, 2022
- Messages
- 1,211
Then read eeprom and send meI don't have the EMC number as the board was bought without any information
It was bought to replace a burnt out board
- Joined
- Feb 27, 2025
- Messages
- 50
give me a bit, I need to take all the electronic components off the blown T201 and install pins to go into my programmer so I can use the socket
- Joined
- Feb 27, 2025
- Messages
- 50
Built the socket yay! Here's the very corrupted dump and the serial in it is garbage
- Joined
- Jan 12, 2023
- Messages
- 4,028
try this
- Joined
- Oct 17, 2022
- Messages
- 1,211
Try this file after do dfu mode and restore
- Joined
- Feb 27, 2025
- Messages
- 50
There's no data in the image it's all FF
- Joined
- Oct 17, 2022
- Messages
- 1,211
Yes ,lets follow
Do dfu and restore
- Joined
- Feb 27, 2025
- Messages
- 50
Got it, doing it now
- Joined
- Feb 27, 2025
- Messages
- 50
AMrestore error Generic Error guess I'll just throw it in the parts bin
Attachments
- Joined
- Oct 17, 2022
- Messages
- 1,211
What was error old bin.
I think your board problem
- Joined
- Feb 27, 2025
- Messages
- 50
The old bin showed the error I do believe 4010. I would have to force it into DFU mode as it was stuck in recovery. The bin you all made worked perfectly as soon as I connected to the other mac it went directly into DFU mode without forcing it and it looked like it was going to work this time but then threw the error and when closed the error it went right into recovery. I'll check the board one last time maybe something fell off when it was stored with three other boards. But i may think after the very first time it booted and threw a fit about being a banned serial number when it was online, it may have corrupted the T2 to beyond repair.
Similar threads
Trending content
-
-
Resource icon
-
-
