Z390-A PRO MS-7B98
bios + Schematic + boardview
bios + Schematic + boardview
About this board
This thread is for the Z390-A PRO MS-7B98.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
MSI MS-7B98 Rev 1.1.rar
2.1 MB · Views: 6
2.1 MB · Views: 6
MS-7B98 Rev 1.1.cad.zip
1.2 MB · Views: 10
1.2 MB · Views: 10
MS-7B98 r1.0.cad.zip
1.2 MB · Views: 8
1.2 MB · Views: 8
MS-7B98.bin.zip
8 MB · Views: 12
8 MB · Views: 12
