MSI
GS43VR 7RE Phantom Pro E14A3IMS
( Intel Core i7 ) GeForce GTX 1060 6GB GDDR5 support
bios + schematic
GS43VR 7RE Phantom Pro E14A3IMS
( Intel Core i7 ) GeForce GTX 1060 6GB GDDR5 support
bios + schematic
About this board
This thread is for the MSI GS43VR 7RE Phantom Pro E14A3IMS.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
E14A3IMS.zip
4.5 MB · Views: 4
4.5 MB · Views: 4
MSI MS-14A3 Rev 2.0 PDF .pdf
2.1 MB · Views: 4
2.1 MB · Views: 4
Last edited:
