MS-16J6 MS-16J61 VER 1.0
Bios
Bios
About this board
This thread is for the MS-16J6 MS-16J61.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Back up the original dump first — it contains machine-specific data (serial, UUID, MAC, ME), and you will want it if anything goes wrong.
If you have a working file for this board, please share it below. More files: search MS-16J6 MS-16J61 in File Finder.
Attachments
MS-16J6 REV0A.pdf
2.9 MB · Views: 4
2.9 MB · Views: 4
MS-16J6 REV0B.pdf
2.4 MB · Views: 4
2.4 MB · Views: 4
MS-16J6 REv1.0.pdf
2.8 MB · Views: 4
2.8 MB · Views: 4
MS-16J6 REV1.1.pdf
2.7 MB · Views: 4
2.7 MB · Views: 4
card VGA.BIN.zip
60.8 KB · Views: 4
60.8 KB · Views: 4
ECENE.bin.zip
41.7 KB · Views: 2
41.7 KB · Views: 2
gl62 6QD MS-16J6 Bios.rar
3.9 MB · Views: 2
3.9 MB · Views: 2
