Huawwei Matebook 13 NX8309
Schematic + boardview
Schematic + boardview
About this board
This thread is for the Huawwei Matebook 13 NX8309.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Usually needed when the laptop powers on with a black screen after a BIOS update, is stuck in a boot loop, or is locked with a BIOS password.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
matebook 13 Boardview NX8309.pdf
229.1 KB · Views: 4
229.1 KB · Views: 4
matebook 13 Schematic.pdf
4.3 MB · Views: 4
4.3 MB · Views: 4
