HP x360 1030 G3 not booting up after flash Restore

Hi there

I have a x360 1030 G3 and tried to remove the admin password with unlocker.
First I made a backup of the MX25L25673G and then flashed unlocked.bin.
Then the Laptop didn't boot up.

I restored the backup but the laptop won't boot up anymore.

No screen, caps lock is lit and after a few seconds a very short flickering of the led (in a loop)

Attached the backup which I restored.

Would be great if you could help me. Thanks.
 

Attachments

readout_2.zip
15.6 MB · Views: 4

Hi there

I have a x360 1030 G3 and tried to remove the admin password with unlocker.
First I made a backup of the MX25L25673G and then flashed unlocked.bin.
Then the Laptop didn't boot up.

I restored the backup but the laptop won't boot up anymore.

No screen, caps lock is lit and after a few seconds a very short flickering of the led (in a loop)

Attached the backup which I restored.

Would be great if you could help me. Thanks.
Hi program back original bios check have display?
 
Hi there

I have a x360 1030 G3 and tried to remove the admin password with unlocker.
First I made a backup of the MX25L25673G and then flashed unlocked.bin.
Then the Laptop didn't boot up.

I restored the backup but the laptop won't boot up anymore.

No screen, caps lock is lit and after a few seconds a very short flickering of the led (in a loop)

Attached the backup which I restored.

Would be great if you could help me. Thanks.
program this bios will ok
https://pkbiosfix.com/threads/hp-elitebook-x360-1030-g3-da0y0pmbaf0-bios-schematic-boardview.378/
 
Just tried it. Flashed both chips.
Unfortunately no luck.
Caps-Lock and Power-LED just flickering.
Perhaps you have another idea ?
Thanks.
 
Just tried it. Flashed both chips.
Unfortunately no luck.
Caps-Lock and Power-LED just flickering.
Perhaps you have another idea ?
Thanks.
Check Hardware!
May be there is any damage during soldering and desoldering of the bios chip
 

Trending content

Back
Top