This thread is for the HP ProLiant ML110 G5 with main board 06146-1.
HP had this board built by Wistron; Wistron board numbers are 5–6 digits plus a revision. Check the number printed on the PCB before you download.
Files wanted for this board
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine. Revision matters: use a file made for 06146-1 specifically.
Have a tested dump for 06146-1? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
HP had this board built by Wistron; Wistron board numbers are 5–6 digits plus a revision. Check the number printed on the PCB before you download.
Files wanted for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine. Revision matters: use a file made for 06146-1 specifically.
Have a tested dump for 06146-1? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
