HP Omen 900 MS-7A09 Rev:1.2
biosbin.zip
schematics
biosbin.zip
schematics
About this board
This thread is for the HP Omen 900 MS-7A09.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash. Board revision: 1.2. Match the revision as well as the board number.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Back up the original dump first — it contains machine-specific data (serial, UUID, MAC, ME), and you will want it if anything goes wrong.
If you have a working file for this board, please share it below. More files: search HP Omen 900 MS-7A09 in File Finder.
Attachments
MS-7A09-1.0.rar
676.5 KB · Views: 2
676.5 KB · Views: 2
MS-7A09-1.1.rar
676.7 KB · Views: 2
676.7 KB · Views: 2
MS-7A09-1.1.pdf
1.2 MB · Views: 2
1.2 MB · Views: 2
MS-7A09-1.0.pdf
1.2 MB · Views: 2
1.2 MB · Views: 2
