This thread is for the HP All-in-One 24-cr0013ne with main board DAN1RMB6D0.
The board was manufactured by Quanta for HP. Quanta board numbers start with DA and include MB, so you can confirm it on the PCB silkscreen.
Files wanted for this board
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Back up the original dump first — it contains machine-specific data (serial, UUID, MAC, ME), and you will want it if anything goes wrong.
Have a tested dump for DAN1RMB6D0? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
The board was manufactured by Quanta for HP. Quanta board numbers start with DA and include MB, so you can confirm it on the PCB silkscreen.
Files wanted for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Back up the original dump first — it contains machine-specific data (serial, UUID, MAC, ME), and you will want it if anything goes wrong.
Have a tested dump for DAN1RMB6D0? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
