Dell inspiron 11 3137 ZM3 DA0ZM3MB8D0
Bios
DELL inspiron 11 3000 series 3137
DA0ZM3MB8D0 REV: D
Quanta ZM3 da0zm3mb8d0 r3A Boardview
da0zm3mb8d0-d-vera-165.brd
ZM3 BOTTOM.pdf
ZM3 TOP.pdf
Bios
DELL inspiron 11 3000 series 3137
DA0ZM3MB8D0 REV: D
Quanta ZM3 da0zm3mb8d0 r3A Boardview
da0zm3mb8d0-d-vera-165.brd
ZM3 BOTTOM.pdf
ZM3 TOP.pdf
About this board
This thread is for the Dell inspiron 11 3137 ZM3 with main board DA0ZM3MB8D0.
The board was manufactured by Quanta for Dell. Quanta board numbers start with DA and include MB, so you can confirm it on the PCB silkscreen.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Usually needed when the laptop powers on with a black screen after a BIOS update, is stuck in a boot loop, or is locked with a BIOS password.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for DA0ZM3MB8D0? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Last edited:
