Dell G7 5587 7588 DDK51_DDK52 _DDK53 LA-E993P Rev 1.0
bios + schematic + boardview
BOARDVIEW.PDF
bios + schematic + boardview
BOARDVIEW.PDF
About this board
This thread is for the Dell G7 7588 DDK51 DDK52 DDK53 with main board LA-E993P.
Dell had this board built by Compal; Compal board numbers start with LA- and end in P. Check the number printed on the PCB before you download. Board revision: 1.0. Match the revision as well as the board number.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Typical reasons to reflash: no power or no display after a failed BIOS update, a BIOS/supervisor password lock, or a corrupted Intel ME region.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for LA-E993P? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
LA-E993P DDK51 boardview (cad).rar
323.2 KB · Views: 10
323.2 KB · Views: 10
LA-E993P r1.0.pdf
4.1 MB · Views: 10
4.1 MB · Views: 10
Dell G5 15 5587 - Compal LA-E993P Boardview PDF.pdf
190.2 KB · Views: 8
190.2 KB · Views: 8
Last edited by a moderator:
