Acer Travel Mate 6252 6292 QUANTA ZU1 Rev;1.2
biosbin.zip
schematics
biosbin.zip
schematics
About this board
This thread is for the Acer Travel Mate 6252 6292 ZU1.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash. Board revision: 1.2. Match the revision as well as the board number.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Common cases: dead board after an interrupted BIOS update, ME region errors, missing serial number or UUID after a board swap, or a password lock.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
QUANTA ZU1 REV 3A - BUTTON & LED BOARD.pdf
27.5 KB · Views: 2
27.5 KB · Views: 2
QUANTA ZU1 REV 3A - USB & RJ11 BOARD.pdf
32.3 KB · Views: 2
32.3 KB · Views: 2
QUANTA ZU1 REV 1A - TOUCHPAD BOARD.pdf
33.2 KB · Views: 2
33.2 KB · Views: 2
QUANTA ZU1 REV 1B - LID & SWITCH BOARD.pdf
32.4 KB · Views: 2
32.4 KB · Views: 2
QUANTA ZU1 REV 3A - FINGERPRINT BOARD.pdf
33.3 KB · Views: 2
33.3 KB · Views: 2
Acer TravelMate 6252 6292 - QUANTA ZU1 - REV 3B.pdf
1.5 MB · Views: 2
1.5 MB · Views: 2
QUANTA ZU1 REV 2A - TOUCHPAD WITH FINGERPRINT BOARD.pdf
38.2 KB · Views: 2
38.2 KB · Views: 2