I tried all the similar bios in the forum and it keeps resetting. There was an image before, the bios in this link is 1.8 volt, when I typed it, it went away.
ACER ASPIRE 3 A315-41G-R7CJ
model no:N17C4
MFG DATE 2019/03/14
S/N:NXGYBEY005911A9243400
SNID:91104330034
Motherboard dh5jv la-g021p
rev:1C
2018-03-02
bios chip:XMC XM25Q64
ACER ASPIRE 3 A315-41G-R7CJ
model no:N17C4
MFG DATE 2019/03/14
S/N:NXGYBEY005911A9243400
SNID:91104330034
Motherboard dh5jv la-g021p
rev:1C
2018-03-02
bios chip:XMC XM25Q64
About this board
This thread is for the Acer Aspire 3 A315-41G-R7CJ.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash.
Files wanted for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Usually needed when the laptop powers on with a black screen after a BIOS update, is stuck in a boot loop, or is locked with a BIOS password.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
